Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.

Don't underestimate the forklift at work. If the operation is not good, there will be serious mishaps in mins, and there are numerous mishaps entailing forklifts.

Instance 1: The forklift cargo blocked the motorist's sight, and the individual in front could not be located, resulting in a moving crash.
Situation 2: In order to maintain the balance of the forklift when lifting heavy products, the workers utilized their body weight as the weight, which practically caused casualties.
Instance 3: The width of the forklift cargo exceeds the permitted size of the course and holds on the roadside rack, which nearly triggers an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift chauffeur did not notice the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the workers unlawfully, the forklift vehicle driver does not use the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not use a safety belt and fell from the lorry when it rolled over and was squashed.
Forklift procedure ought to take note of these matters ：.

Begin.
1. Before beginning, observe the environments, and after validating that there are no barriers that hinder the security of driving, beep the horn first and afterwards start.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale have to be risk-free before starting.
3. When the forklift starts with a tons, the driver needs to initially confirm that the tons is secure and reputable.
4. The begin needs to be sluggish and steady.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the pole ought to be tilted in reverse. .
2. Do not raise the fork too expensive when driving. When going into and leaving the job website or while driving, be careful that there will be no obstacles in the sky. When the load is taking a trip, the fork should not be elevated expensive, which will certainly influence the security of the forklift. .
3. After discharging, the fork should be decreased to the normal driving position prior to driving. .
4. When turning, if there are pedestrians or lorries close by, the driving signal ought to be issued initially. High-speed doglegs are restricted. High-speed doglegs will certainly create the automobile to lose side security and tip over. .
5. When the forklift is downhill, it is purely prohibited to switch off the flame and slide, and it is restricted to brake instantly while driving with tons unless there are unique circumstances.
6. When the forklift is running, it needs to comply with the web traffic rules in the factory and must keep a certain safety range from the vehicle ahead. .
7. When the forklift is running, the lots needs to remain in the most affordable placement that does not prevent the driving, and the gantry ought to be effectively slanted back. The tons will not be elevated except when stacking or packing. .
8. The elevation of the lots need to not block the driver's sight. In unique conditions, when the item affects the forward vision, drive at a low speed when reversing.
9. It is prohibited to turn on the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a low rate when going into the manufacturing workshop area. .
11. When the forklift is lifted, lifted or driven, it is forbidden for personnel to stand on the fork to hold things and play a stabilizing function. .
12. If problems are discovered, they will certainly be repaired and reported in a prompt manner, and they will never run with health problems or conceal them.

packing and unloading.
1. When fork-loading products, the distance between both forks need to be adjusted as required to make the tons of the two forks well balanced and not manipulated, and one side of the item need to protest the rack. .
2. It is forbidden to collaborate with a single fork or use a fork top or draw. In special circumstances, safety and security warning signs should be set up to advise bordering pedestrians. .
3. In the process of loading and unloading things, the forklift should be braked with the brake. .
4. The rate of the car ought to be slow and steady. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt individuals. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as possible under the tons, and it should be kept in mind that the fork idea ought to not touch various other items or items. The load must be stabilized with very little back tilt of the gantry to make sure that the load does not move backwards. The pole can be tilted ahead a little when the load is decreased to permit very easy placement of the tons and removal of the forks. .
6. It is restricted to fork items at high speed and ram tough things with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to stand around the fork, so as to avoid the collapse of the goods and injure individuals. .
8. Overwhelming is forbidden, and it is banned to make use of forks to raise employees to participate in high-altitude procedures to prevent high-altitude dropping crashes. .
9. It is not enabled to utilize the brake inertia to slip, place, round or roll things. .
10. It is not permitted to make use of forks to select, transform pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you have to discharge the goods or lower the fork framework.
2. Draw the hand brake take care of to dead or dispirit the parking brake button.
3. The engine is shut off and the power is cut off. (Except for special conditions, such as the driver does not leave the automobile's line of vision and Electric Forklift Truck for Warehouse does not go beyond 1 min).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look should be checked, and fuel, lubricating oil and air conditioning water must be included.
2. Inspect the security performance of beginning, running and braking.
3. Inspect whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, inspect whether the stress and temperature level are normal.
5. After the forklift is running, the outside leak should also be checked and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You need to check before leaving the car;.
2. When you encounter a person in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the lorry must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or hefty goods and go to the vehicle driver's line of vision, they need to take the reversing Stand-on Electric Pallet Stacker workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844